This is the top of the page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Orchestrating a brigher world


  1. Home
  2. Support
  3. NEC Frequently Asked Questions

NEC Frequently Asked Questions

Model Name:
Search FAQs (Question & Answer)


Unable to use Ghost to clone a computer that uses Windows 2000

Audio Device

If I remove the sound driver from Device Manager and try to reinstall it, an exclamation point will appear next to the sound driver in Device Manager and the system will indicate that there are no conflicts. How do I reinstall the sound driver?


After I install a 3COM modem kit #OP-710-4019 on any Versa System using Internet Explorer 4.01 and the Active Desktop feature, an error message will appear upon rebooting the system:

"Can not find the file "C:\~tmpset._X~\setup_.EXE" (or one of it components)..."

My system stops responding when running diagnostics on my PC Card modem in Control Panel. How do I fix this?
US Robotics XJ1560 PC Card modem will not install under retail versions of Windows NT 3.51 or NT 4.0 that do not include Card and Socket Services support (such as Systemsoft Card Wizard software). Windows NT does not provide an additional COM port for use by the modem. How is the modem installed?


How do I properly configure the Xircom CE2 Card under Win3.11?

Operating System

When the Advanced Power Management is disabled in Windows 95 a VXD loading error occurs during bootup. How can I remove the error?
Why does the system go into Suspend mode in Windows 98 instead of Standby? Also, why does the system "Save to File" instead of Hibernate in Windows 98?


Why isn't the system clock updated when resuming from Suspend in Windows 3.11 with power management set to off?


Why don't some devices work on the Parallel port of the USB Portbar?


My Versa 4200 with 800x600 panel shows a smaller DOS screen than the Versa 4000. How do I correct this?