This is the top of the page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Orchestrating a brigher world

USA

D5652 Hard Drive

Capacity Formatted: 134.84 MB
Unformatted: 172.76 MB
Configuration Information
Switches Drive Address Switch:
DS3 "on" = address 4; bit value = 4
DS2 "on" = address 2; bit value = 2
DS1 "on" = address 1; bit value = 1
Terminating Resistor Switches:
For a single drive configuration, set all three 4-position switches to "on."
For multiple drive configuration, device at furthest end should be all "on," and
all other devices should be "off."
Mode Switches:
Mode P = 1 enables write protect
Mode S = 1 enables hard sector mode
Mode B = 0 disables byte clock mode
Mode A = 0 disables address mark found
Mode M = 0 enables motor start at pwr-on
Mode C = 0 disables set byte/sector cmd
Dimensions
Height 3.3 in
Width 5.75 in
Depth 8.2 in
Weight 7.0 lb
Disk Configuration
Disk Size 5.25"
Disks 6
Servo Heads 1
Data Heads 10
Data Surfaces 10
Tracks/Surface 823
Track Density 926 tpi
Bit Density 18,758 bpi
Sectors/Track 64
Bytes/Sector 256
Record Method 2,7 RLL
Rotational Rate 3,573 RPM
Start/Stop Time Start = 20 sec typical Stop = 25 sec typical
Environmental
Temperature Operating = 5° to 45° C
Non-operating = -40° to 60° C
Humidity Operating = 8% to 80%
Non-operating = 8% to 90%
Wet Bulb, Max 29° C max
Shock Operating = 2.0 G (11 ms)
Non-operating = 20 G (11 ms)
Vibration Operating = 0.2 G
Non-operating = 0.5 G
Performance Specifications
Interface ESDI
Data Transfer 1.25 MB/sec
Seek Times Average = 23 ms
Track to track = 5 ms
Maximum = 45 ms
Latency, Avg 8.4 ms
Power
Voltage Required +5V/+12V
Reliability
MTBF 20,000 POH
MTTR < 30 minutes