This is the top of the page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Orchestrating a brigher world

USA

D3827 Hard Drive

Capacity Formatted: 1,083 MB
Per Disk: 365 MB
Configuration Information
Switches SW1-1 = "off" (factory use only)
SW1-2 = "off" (start command disable)
SW1-3 = "on" (parity check enable)
SW1-4 = "on" (SCSI ID-0; bit value = 4)
SW1-5 = "on" (SCSI ID-1; bit value = 2)
SW1-6 = "on" (SCSI ID-2; bit value = 1)
Dimensions
Height 1.0 in/25.4 mm
Width 4.0 in/101.6 mm
Depth 5.74 in/146 mm
Weight 1.25 lb/0.6 KG
Disk Configuration
Disk Size 3.5"
Disks 3
Data Heads 6
Data Surfaces 6
Tracks/Surface 3,493
Track Density 3,800 tpi
Bit Density 71,000 bpi
Record Method 1-7 RLL
Rotational Rate 4,090 RPM
Start/Stop Time 15 ms
Environmental
Temperature Operating = 5° to 55° C
Non-operating = -40° to 60° C
Humidity Operating = 8% to 80%
Non-operating = 8% to 90%
Thermal Grad 20° C/Hr max
Shock Operating = 5 G (1/2 sine, 11 ms)
Non-Operating = 75 G (1/2 sine, 11 ms)
Vibration swept sine, 1 octave/minute
Oper = 0.5 G @ 5-100 Hz
Non-op = 5 G @ 5-100 Hz
Performance Specifications
Seek Times Average = 11 ms
Track to track = 3 ms
Maximum = 23 ms
Latency, Avg 7.3 ms
Cache Memory Read = 64 KB Write = 32 KB
Interface SCSI-2
Data Transfer To/from media = 6.0 MB/sec
To/from buffer:
Synchronous = 10.0 MB/s
Asynchronous = 5.0 MB/s
Power
Voltage Required +5V/+12V
Power Dissipation Read/write/seek = 3.6 watts
Sleep mode = 1.8 watts
Reliability
MTBF 300,000 POH
MTTR < 30 minutes
Error Rate Recoverable = <1 per 10-10th bits
Un-recoverable = <1 per 10-13th bits
Seek = <1 per 10-7th bits