This is the top of the page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Orchestrating a brigher world

USA

D3741 Hard Drive

Configuration Information
CMOS Setup Cylinders = 423
Heads = 8
Sectors/track = 26
Landing zone = automatic/-1
Write precompensation = automatic/-1
Switches JP12 open; JP13 open = one drive mode
JP12 open; JP13 short = no setting allowed
JP12 short; JP13 open = master, 2 drive mode
JP12 short; JP13 short = slave, 2 drive mode
JP15 open = default (5 bit error correction)
Dimensions
Width 4.0 in/101.6 mm
Depth 5.74 in/146 mm
Disk Configuration
Disk Size 3.5"
Disks 4
Data Heads 8
Data Surfaces 8
Tracks/Surface 423
Track Density 850 tpi
Bit Density 17,000 bpi
Record Method 2,7 RLL
Rotational Rate 3,600 RPM
Start/Stop Time 15 sec typical
Environmental
Temperature Operating = 5° to 50° C
Non-operating = -40° to 60° C
Humidity Operating = 8% to 80%
Non-operating = 8% to 80%
Thermal Grad 20° C Hr/max
Wet Bulb, Max 29° C
Shock Operating = 2 G (1/2 sine, 11 ms)
Non-operating = 40 G (1/2 sine, 11 ms)
Vibration Oper = 0.5 G @ 0-100 Hz
Non-op = 2 G @ 0-100 Hz
Performance Specifications
Seek Times Average = 23 ms
Track to track = 8 ms
Maximum = 40 ms
Latency, Avg 8.33 ms
Interface IDE
Data Transfer 0.937 MB/sec
Power
Voltage Required +5V/+12V