This is the top of the page.
Jump to main content.

Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Orchestrating a brigher world

USA

D3735 Hard Drive

Configuration Information
CMOS Setup Cylinders = 537
Heads = 4
Sectors/track = 41
Landing zone = automatic
Write precompensation = automatic
Switches JP12 open; JP13 open = one drive mode
JP12 open; JP13 short = no setting allowed
JP12 short; JP13 open = master, 2 drive mode
JP12 short; JP13 short = slave, 2 drive mode
Dimensions
Height 1.0 in/25.4 mm
Width 4.0 in/101.6 mm
Depth 5.74 in/146 mm
Weight 1.25 lb/0.6 KG
Disk Configuration
Disk Size 3.5"
Disks 1
Data Heads 2
Data Surfaces 2
Tracks/Surface 1,074
Track Density 1,800 tpi
Bit Density 30,000 bpi
Record Method 1,7 RLL
Rotational Rate 3,456 RPM
Start/Stop Time 15 sec typical
Environmental
Temperature Operating = 5° to 50° C
Non-operating = -40° to 60° C
Humidity Operating = 8% to 80%
Non-operating = 8% to 80%
Thermal Grad 20° C Hr/max
Wet Bulb, Max 29° C
Shock Operating = 5 G (1/2 sine, 11 ms)
Non-operating = 55 G (1/2 sine, 11 ms)
Vibration Oper = 0.5 G @ 5-100 Hz
Non-op = 5 G @ 5-100 Hz
Performance Specifications
Seek Times Average = 25 ms
Track to track = 8 ms
Maximum = 45 ms
Latency, Avg 8.68 ms
Interface IDE
Data Transfer 1.5 MB/sec
Power
Voltage Required +5V/+12V
Storage Capacity
Unformatted 56.4 MB