| Capacity |
Formatted:
40.3 MB
Unformatted:
51.24 MB |
| Configuration Information |
| Switches |
Drive Address Switch:
SW2-1 "on," all others "off" = addr 1
SW2-2 "on," all others "off" = addr 2
SW2-3 "on," all others "off" = addr 3
SW2-4 "on," all others "off" = addr 4
Terminating Resistor Switch:
Serial configuration-SW1-1 always "off";
if one drive, set SW1-2 thru 8 to "on."
If more than one drive, set SW1-2 thru 8
to "off."
Parallel configuration-set SW1-1 thru 8
to "on" for all drives. |
| Dimensions |
| Height |
1.6 in/41 mm |
| Width |
4.0 in/101 mm |
| Depth |
5.8 in/146 mm |
| Weight |
2.0 lb/0.9 KG |
| Disk Configuration |
| Disk Size |
3.5" |
| Disks |
4 |
| Data Heads |
8 |
| Data Surfaces |
8 |
| Tracks/Surface |
615 |
| Track Density |
850 tpi |
| Bit Density |
14,000 bpi |
| Record Method |
MFM |
| Rotational Rate |
3,600 RPM |
| Start/Stop Time |
15 seconds typical |
| Environmental |
| Shock |
Operating = 2 G (10 ms)
Non-operating = 40 G (10 ms) |
| Vibration |
Operating = 0.2 G
Non-operating = 0.5 G |
| Performance Specifications |
| Seek Times |
Average = 40 ms
Track to track = 8 ms
Maxiumum = 80 ms |
| Latency, Avg |
8.33 ms |
| Interface |
ST412 |
| Data Transfer |
625 KB/sec |
| Power |
| Voltage Required |
+5V/+12V |
| Power Dissipation |
Ready mode = 9.2 watts |
| Reliability |
| MTBF |
30,000 POH |
| MTTR |
30 Minutes |
